montigroup

DUSTLESS SANDBLASTING

Dustless sand blasting is a quick and clean method for removing paint, rust, and dirt without creating dust clouds.

Dustless sandblasting can be done fast, cutting down the effort and time needed to remove material from surfaces. With no dust spreading around, it’s more practical to sandblast without a dustless system, making it suitable for projects that need a good clean with minimal disturbance.

WHAT IS DUSTLESS SANDBLASTING

Dustless sandblasting is an efficient and cost-effective method of stripping a variety of surfaces without leaving behind excessive dust and other contaminants. This blasting process is faster and takes far less time than traditional methods, as it removes impurities from the surface in a more efficient manner. The process is also much safer, as there is minimal cleanup required after job completion, limiting the amount of time and money spent on the cleanup process.

ADVANTAGES OF DUSTLESS SANDBLASTING

Dustless sandblasting is a method of abrasive blasting which is totally dust free. So there is no need for extra ventilation and suppression systems.

WHAT ARE THE DISADVANTAGES OF DUSTLESS SANDBLASTING?

Firstly, there is the issue of cost. Dustless sandblasting usually requires more specialized equipment and is typically more labor intensive, meaning that it may be more expensive than other methods. Additionally, dustless sandblasting requires more training due to the increased complexity of the equipment.

SURFACE PREPARATION WITHOUT DUST WITH MONTIPOWER’S POWER TOOLS

Certain standards apply to the surface preparation of steel. Normally, the use of industrial coatings requires a surface cleanliness of Sa 2.5 (or SSPC-SP10 or NACE 2) and a specific roughness based on the surface preparation standards. In most cases, abrasive grit blasting is used for this purpose. ‘Sand blasting’ has traditionally been the best known method of grit blasting, but nowadays, grit blasting can also be done with other materials. But how does surface preparation with grit blasting actually work? What types of grit blasting are there, what are the advantages and disadvantages, and how are MontiPower’s power tools a good alternative for this?

ALTERNATIVE FOR THE DUSTLESS SANDBLASTER: THE BRISTLE BLASTER®

The Bristle Blaster® is MontiPower’s alternative to grit blasting. The grit-free patented Bristle Blaster® is able to produce a surface quality comparable to grit blasting both in cleaning of the object and in roughness capacity:

– surface cleanliness of Sa 2.5 or SSPC-SP 10

– roughness capacity up to 120 μm Rz (ca. average 65-83 μm Rz on API 5L steel)

The major advantages of the power tools over traditional blasting methods are their simplicity in use and their relatively low cost. This is because the surface is prepared with a light, handheld machine. Other alternatives to grit blasting that are used to work smaller areas are also unable to prepare a surface profile suitable for industrial coating. In addition, these other alternatives to grit blasting usually cannot meet the surface cleanliness and roughness requirements, which is possible with the Bristle Blaster®.

Bristle Blasting is ideally suited for portable usage as no protective suits with closed system respiratory equipment are required and no complex machinery or other grit media recovery equipment is needed. Only the application of standard personal protective equipment (PPE) is recommended for the eyes, face, hands and respiratory. Apart from the materials removed, no other additional or environmentally harmful waste products are produced.

HOW DO THE ALTERNATIVE DUSTLESS SANDBLASTER  TOOLS WORK?

MontiPower’s alternative grit blasting tools are manually operated tools equipped with a rotating brush. Due to the specially designed curved brush tips, the surface is cleaned quickly and easily, with similar results to traditional grit blasting. Because the tips are released with a great deal of force from behind the tools’ accelerator bar, they immediately retract from the surface, providing the same roughness as with grit blasting. In this way, the Bristle Blaster® offers all the advantages of grit blasting, including the high-quality result. This makes MontiPower power tools for many markets the relatively cheap, easy to operate and effective alternative to the traditional grit blasting machine.

Frits Doddema

Frits Doddema

Author of MontiPower®

Leadership | Sales | Marketing | Development

Our CEO Frits Doddema, born in 1970, has a background in Industrial Coatings since 1998. He worked for Sigma Marine Coatings The Netherlands, Carboline Coatings for Germany/Central Europe, STOPAQ BV from the Netherlands, and SealforLife Industries before he joined MONTI - Werkzeuge GmbH in 2018. Since 2008 he works as the CEO/Partner.

He is passionate about alternating solutions which make a true difference. Nothing is impossible is his credo. To make the impossible possible, Frits and the management believe in just one idea to make it happen and to turn the company in a great firm. The innovative approach for game-changing blasting and paint solutions is hands-on keeping in mind the difficult field circumstances for operators, respecting nature and long term costs. The mission is to avoid any disagreement over quality of prep work and coating. Frits and his team push for non-hazardous long term corrosion prevention solutions to overcome any hassle out of a coating job ensuring the best possible bond. The world’s best coatings deserve the world’s best surface preparation. Like in daily life, preparation is everything. From different perspectives like Safety, Health, Ergonomics, Productivity, Recyclability, Co2 neutrality of the plant and the coating process, Substrate Compatibility, Corrosion Resistance, Frits and team are driven to come with improved unique contribution solutions to existing and new end markets.

News

The latest news about us

Comments are disabled.